Speco Technologies CS4 DVR User Manual


 
4- & 8-Channel Digital Video Recorder
21
PTZ Setup – The user can establish all PTZ settings on a local system or a PC running Speco Central.
Alarm-Out Setup – The user can establish all Alarm-Out settings on a local system or a PC running
Speco Central.
Covert Camera Setup – The user can establish all Covert Camera settings on a local system or a PC
running Speco Central.
Record Setup The user can establish all Record settings on a local system or a PC running Speco Central.
Digital Deterrent Setup – The user can establish all Digital Deterrent settings on a local system.
Setup Import – The user can import saved DVR settings from a local system or a PC running Speco
Central.
Setup Export The user can export the current DVR settings to a local system or a PC running Speco
Central.
To add a User, highlight the + User… box and press the button.
A virtual keyboard appears allowing you to enter the User Name.
Enter the name and assign the User to a Group and password. You
can use camera buttons 1 to 9 on the front panel to assign the
password. The password can be up to 8 digits. You will be asked
to confirm the password.
NOTE: In addition to using the front panel buttons or the infrared remote control, you can
use the virtual keyboard to assign the password. To display the virtual keyboard click the
button using the mouse (not supplied).
Highlighting the box beside Auto Login allows you to select a User to be automatically logged
in when the DVR is powered up. It can also be set to never automatically login a user.
Highlighting the box beside Auto Logout allows you to select from a list of times that the user
will be automatically logged out. The options are: Never, 1 min., 3 min., 5 min., 10 min., 15 min.,
20 min., 30 min. and 1 hr.
EZ Setup
Highlight EZ Setup and press the button. The EZ Setup screen appears. The EZ Setup guides
you through configuring the system for basic operation.
NOTE: This EZ Setup screen can only be accessed when logged on as the admin user.
Figure 16 EZ Setup screen.
Select either EZ Record or EZ Network and
select the Next button to start the selected setup.
NOTE: Selecting the Cancel button
throughout the screens exits the EZ Setup
without saving your changes and returns to
the main setup screen.