Speco Technologies CS4 DVR User Manual


 
4- & 8-Channel Digital Video Recorder
85
Error Code Notices
System Upgrade Related Clip Copy Related
No. Description No. Description
0
Unknown error.
0
Unknown error.
1
File version error.
1
Device error.
2
Operating system version error.
2
Mounting failed.
3
Software version error.
3
No media.
4
Kernel version error.
4
Invalid media.
100
Upgrade device mounting failed.
5
File already existed.
101
Package is not found.
6
Not enough space.
102
Extracting package failed.
7
Creating temporary file failed.
103
LILO failed.
8
Opening disk failed.
104
Rebooting failed.
9
Formatting disk failed.
105
Invalid package.
10
Database has been changed.
300
Remote connection failed.
11
Appending failed.
301
Remote network error.
12
Bad sector.
302
Remote upgrade is not authorized.
13
No executable file.
303
Saving remote package failed.
14
Opening executable file failed.
304
Remote upgrade is cancelled by the user.
15
Writing executable file failed.
400
USB device mounting failed.
16
Creating image failed.
401
Reading upgrade package on the USB
device failed.
402
Copying upgrade package on the USB
device failed.
500
System is busy clip copying.
Troubleshooting
Problem Possible Solution
No Power
Check power cord connections.
Confirm that there is power at the outlet.
No Live Video
Check camera video cable and connections.
Check monitor video cable and connections.
Confirm that the camera has power.
Check camera lens settings.
DVR has stopped
recording
If hard disk drive is full, you will either need to delete video or set
the DVR to the Overwrite Mode.
The icon displays,
however, the DVR is not
recording.
When the DVR is in the Pre-Event recording mode, the yellow
and
display when there is no event, and the DVR is not recording.
The red
and
display when any event occurs and the DVR starts
recording.