Speco Technologies CS4 DVR User Manual


 
Operation Instruction
68
Export
Selecting (Export) in the Search menu displays the following Export menu. See the following
Clip Copy section for details.
EZ Copy: Selecting EZ Copy will set the starting point of the video
to be clip copied, and the
icon displays at the bottom-left corner of
the screen. Selecting EZ Copy again will set the ending point of the
video to be clip copied and displays the Clip-Copy screen.
Clip-Copy: Select Clip-Copy, and the Clip-Copy screen appears to allow clip copy setup.
Digital Deterrent Recording: Selecting Digital Deterrent Recording allows you to extract
audio files from recorded audio on the DVR. Refer to Chapter 3 – Configuration – Digital
Deterrent section for details.
Camera Menu
Selecting (Camera Menu) in the Search menu displays the following Camera Menu.
Audio: Selecting Audio toggles audio playback On and Off. Recorded audio will be played
when the DVR displays a camera with recorded audio in full screen mode.
Enable De-Interlace: Selecting Enable De-Interlace turns the de-interlace filters on.
NOTE: The video signal has a time difference of 1/60 second (1/50 second for PAL) between
odd and even fields because it is composed of 60 interlaced fields per second (50 fields
for PAL). When recording video with Very High (D1) resolution, video is made up of frame
units combining two fields – one odd field and one even field. This can cause horizontal
scan lines or flashes in areas with motion because of the time difference between the
two fields. Turning on the de-interlace filter provides clearer video by eliminating these
horizontal scan lines and flashes.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the
screen while in the search mode.
Alarm
Selecting (Alarm) in the Search menu resets the DVR’s outputs including the internal buzzer
during an alarm. It is the same as pressing any button on the front panel when the alarm is activated.
Digital Deterrent
Selecting (Digital Deterrent) in the Search menu displays the following setup screen and allows
the DVR to play manually.
Highlight the box beside Source name and press the
button to select the source file to play. Highlighting
Trigger plays the selected file as the digital deterrent.
Zoom: Selecting Zoom and choosing the camera number zooms the current
playback image of the selected camera on the screen.