Speco Technologies CS4 DVR User Manual


 
4- & 8-Channel Digital Video Recorder
51
NOTE: A user who does not have Covert Camera View authority cannot view video from
cameras set to Covert 1 or Covert 2 in both the live monitoring and playback modes.
Highlight the PTZ tab, and the PTZ setup screen displays.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
button. Change the number by highlighting it and using the Up and Down arrow buttons to
increase and decrease the number. The PTZ ID number can be set from 0 to 256.
Highlight the Setup… box and press the button. The Port Setup window appears.
Figure 55 Camera setup screen.
You can turn the camera number On or Off, and
you can change the Title of each camera using
the virtual keyboard. You can also determine
which cameras will display on the monitors by
selecting Normal, Covert 1 or Covert 2 from
a drop-down list in the Use column.
NOTE: When selecting the Covert 1, the DVR
displays the camera title and status icons on
the covert video. When selecting the Covert
2, the DVR displays only camera title on the
covert video.
Figure 56 Camera PTZ setup screen.
NOTE: You will only be able to set up PTZ
devices if the PTZ port is set to RS232 or
RS485.
Highlight the box in the Product column for the PTZ camera you wish
to configure and press the
button. A list of PTZ devices appears.
Select your camera from the list and press the
button. You will need
to connect the camera to the RS232 or RS485 connector on the back
of the DVR following the camera manufacturer’s instructions.