Speco Technologies CS4 DVR User Manual


 
Operation Instruction
82
Click the to control alarm out devices at the remote site.
Click the to set up the image drawing mode and OSD display. You can adjust the display
speed by changing the image drawing mode, and select OSD information to be displayed on
the screen.
Click the to save the current image as a bitmap or JPEG file format.
The event status window at the bottom displays a list of events that were detected from the
remote site.
Selecting a camera on the screen and clicking the right mouse button displays the text menu
screen.
Change Camera Title: Changes the camera name.
Enable Audio: Enables audio communication with the remote site. When the
audio control panel displays, click the
to send audio to the connected remote
site and click the button again to stop sending audio. Click the
to monitor live
audio from the connected remote site through the attached speaker and click the
button again stop monitoring live audio. Clicking both
and allows two-way
communication. Clicking the
disables audio communication.
Aspect Ratio: Changes the image aspect ratio.
Deinterlacing: Using a deinterlace filter for interlaced video enhances image display quality by eliminating
horizontal scan lines and noise in areas with motion.
Anti-Aliasing Screen: Enhances image display quality by eliminating stair stepping (aliasing) effects
in the enlarged image.
NOTE: A camera name change in the Remote Watch mode does not affect the camera name
set up on the remote site. Leaving the Camera Title blank causes the camera name set up
on the remote site to display.
NOTE: The icon will display on each camera screen when audio communication is
available between the Speco Remote system and a DVR.
Web Search Mode
Remote Search is a remote web search program that allows you to search recorded video on the
remote DVR.
NOTE: The remote site connection in the Remote Search mode will automatically be
disconnected if there is no activity for 30 minutes.