Filter
Top Products
Operation Instruction
64
Figure 66 ─ PTZ Select Camera menu.
< Set Preset >
< Move to Preset >
You can save camera position settings as “presets” so that you
can go directly to desired views.
Once you have the camera at the desired settings, press the
PRESET SET button on the remote control, and the Set Preset
dialog box will appear. Select the number you want to assign
to the preset and press the
(Play/Pause) button. Use the
virtual keyboard to enter the preset name.
Press the PRESET SELECT button on the remote control to
load the PTZ preset, and the Move to Preset dialog box will
appear. Select the desired preset and press the
button to
load the preset.
Figure 67 ─ PTZ Preset screen.
You can use a mouse for convenient PTZ control. Position the mouse pointer at the bottom of
the screen, and the following PTZ toolbar will display.
Clicking on the left side exits the toolbar. If you want to display the toolbar
again, position the mouse pointer at the bottom of the screen. Change the
toolbar location by clicking the empty space on the left side of the toolbar and
drag it to where you want it located on the screen. Use the arrow buttons on
the toolbar to pan or tilt the camera in the direction you want. The other controls
on the toolbar perform as described below:
Zoom In / Out
Focus Near / Far
Iris Open / Close
Set / Load Preset
Select the PTZ camera you wish to control. The icon flickers on the PTZ
camera screen. To use the remote control buttons, press the Left and Right
arrow buttons to pan left and right. Press the Up and Down arrow buttons to
tilt the camera up and down. Press the
ZOOM + button to zoom in, and press
the ZOOM – button to zoom out. You can use the FOCUS and FOCUS
buttons to focus the image. You can establish preset positions for PTZ cameras.
Press the
PRESET SET button to establish Presets. You can quickly move
PTZ cameras to Preset positions. Press the PRESET SELECT button to view
an established camera Preset position.
While in the PTZ mode, pressing the MENU button and selecting (Advanced
PTZ) in the menu displaying at the top of the screen displays the Advanced PTZ
menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera
manufacturer’s instructions for the proper settings. Depending on the camera
specifications, some features may not be supported.