Speco Technologies CS4 DVR User Manual


 
4- & 8-Channel Digital Video Recorder
47
NOTE: Selecting Use Mobile sets the recorded image resolution to Standard automatically
regardless of your Record settings.
NOTE: Selecting Use Mobile sets the remote watch quality to Basic automatically regardless
of your Network – Remote Watch settings.
NOTE: Selecting Use Mobile sets the Speco Remote service to be enabled automatically
regardless of your Speco Remote settings.
NOTE: You can access a remote DVR and monitor live video images using media players,
such as VLC Player, supporting RTSP service. Start the media player on your local PC and
enter “rtsp://ID:Password@IP address:RTSP port number/track ID=‘channel number’”, or
start Internet Explorer on your Blackberry or other mobile devices and enter “http://IP address:
Speco Remote port number/”.
NOTE: Some media players might play video properly depending on network conditions.
NOTE: RTSP service might not be supported, depending on the type of media player.
Highlight the Speco Remote tab, and the Speco Remote setup screen displays.
Notification
Highlight Notification in the Network menu and press the button. The Notification setup screen
displays.
Figure 49 Speco Remote setup screen.
Highlight Enable Speco Remote Service and
press the
button to toggle between On and
Off. See Appendix – Speco Remote for detailed
descriptions of the Speco Remote service.
Highlight the box beside Port and press the
button. Set the port number used when accessing
Speco Remote by using the Up and Down arrow
buttons to increase or decrease the numbers.
Figure 50 Notification Callback setup screen.
The DVR can be set up to contact a computer
running Speco Central (Remote Administration
System) when an event occurs. Highlight LAN
and press the
button to toggle between On and
Off. When LAN is turned On you can change
the IP addresses.
Highlight the IP Address box that you want to
change and press the
button. Use the arrow
buttons to enter the IP address of the computer
you want contacted during an event. You can
enter up to five IP addresses.