Filter
Top Products
SurfControl Web Filter v5.5 Administrator’s Guide 63
R
ULES
A
DMINISTRATOR
Who Objects
7
• MAC Address - Enter the MAC address for the computer you want the rule to apply to.
Subnet Object
A subnet allows you to take a single IP network address and split it up so that it can be used on several
interconnected local networks. A subnet mask determines the maximum number of hosts on a subnetwork.
To obtain the IP address and Subnet Mask for a particular computer on your network, run the following
command from a Command Prompt window:
ipconfig /all Make a note of the IP Address and Subnet
Mask entries.
Figure 7-4 Subnet object properties.
• Name - Enter a name for your Subnet object.
• IP Address - Enter the IP address.
• Subnet Mask - Enter the Subnet Mask.
Who List Objects
A Who list object can consist of several specific objects from the Who Object list. This gives you a
convenient way of grouping objects to share a set of rules. To create a Who List, drag individual Who
Objects from the bottom right-hand pane to the Members pane.
Figure 7-5 Who List object properties.
• Name - Enter a name for your Who List object.
• Members - This panel will show the individual objects that make up your list.