Filter
Top Products
4-7
Servicing Precautions
4. At the rear of the power supply chassis, disconnect the following:
a. Disconnect the two plugs connected to the jacks at the top of the left
rear opening in the chassis. See Figure 4-2
.
b. Remove the two nuts securing the large cables on the right rear
opening in the chassis and disconnect the cables. See Figure 4-2
.
NOTE:
Pioneer power supply units are shown in Figure 4-2. In the Todd power
supply units, the lugs are diagonal.
5. Locate and release the four captive slotted screws behind the top lip of
the right and left hand openings in the chassis
(Two screws on each side).
Figure 4-2. Frame Power Supply Connector Removal