Filter
Top Products
11
EN
Introduction Connections Basic Setup Playback
Editing
Others
Function Setup
Recording
Functional Overview
Front Panel
1 ON/STANDBY button
• Press to turn the unit on and off.
• If timer programmings have been set, press to
set the unit in timer-standby mode.
2 Disc tray
• Place a disc when the disc tray is opened.
3 A OPEN/CLOSE button*
• Press to open or close the disc tray.
4 Infrared sensor window
• Receive signals from your remote control so that
you can control the unit from a distance.
5 H (SKIP) button
• During playback, press once midway through a
chapter or track to go back to the beginning of
the current chapter or track. When pressed
twice in quick succession, playback will start
from the preceding chapter or track.
During playback, press and hold for 1.5 seconds
to fast reverse.
When playback is paused, press to play reverse
step by step.
When playback is paused, press and hold for
1.5 seconds to slow reverse.
6 G (SKIP) button
• During playback, press to skip to the next
chapter or track.
During playback, press and hold for 1.5 seconds
to fast forward.
When playback is paused, press to play
advance step by step.
When playback is paused, press and hold for
1.5 seconds to slow forward.
7Display
• Refer to “Front Panel Display Guide” on
page 18.
8HDMI indicator
• Lights up and indicates the HDMI output mode
when HDMI output is on.
9 AUDIO input jacks (AV3)
• Use to connect external device with a RCA
audio cable.
10 VIDEO input jack (AV3)
• Use to connect external device with a RCA
video cable.
11 S-VIDEO input jack (AV3)
• Use to connect the S-video output of external
device with an S-video cable.
12 I REC button
• Press once to start a recording. Press
repeatedly to start one-touch timer recording.
13 B PLAY button*
• Press to start or resume playback.
14 C STOP button
• Press to stop playback or recording.
• Press to stop timer recording.
1080p
RECPLAYSTOPSKIP
1080i 720p 576p/480p
DVD -RW/R +RW/R RECORDING
I/y
OPEN/CLOSE
ON/STANDBY
S-VIDEO VIDEO L R
AV3
12
3*
56
91011
14
13* 12
4
78
(
*
)
The unit can also be turned on by pressing these buttons.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some
operations can be carried out using the buttons on the front panel.
E7J70BD_EN.book Page 11 Monday, May 7, 2007 3:31 PM