Filter
Top Products
42
EN
Timer Recording (EPG)
With EPG system, you can programme DVB channel
recording much easier. You only choose a programme
and enter the selection.
1 While viewing DVB channel, press
[GUIDE].
List of DVB channels will be displayed.
2 Select a desired channel using
[U / D], then press [ENTER/OK].
Time schedule of the DVB channel will be
displayed.
• If you press [BLUE] instead of [ENTER/OK]
after you select a channel using [U / D], you
can watch the selected channel.
3 Select a desired programme using
[U / D], then press [ENTER/OK].
EPG Programme Detail menu will be displayed.
4 Press [RED].
Timer Programming menu will be displayed.
5 Set “Mode” and “STTL” using
[U / D/ L / P], then press
[ENTER/OK].
Satellite Link
You can set the unit to start recording whenever it
detects the video scart control from the external tuner.
Preparing for the Satellite Link Timer Recording:
[Preparation of the external tuner]
• The external tuner should be equipped with
some kind of timer function. Using timer function
of the tuner, set it to be turned on when it comes
to the time you want to start recording, and off
when it comes to the time you want to finish
recording. (Refer to the tuner’s manual on how
to set the timer.)
• Make sure to turn off the external tuner when
you finish setting.
[Preparation of this unit]
• Make sure to select the desired Recording
mode beforehand.
1 Press [SAT.LINK].
2 Select the time and mode using
[U / D], then press [ENTER/OK].
3 Set a start time which is one minute
ahead of the programme time using
[U / D], then press [P].
• The hour can be selected among 0-23.
• Repeat this step to set the desired minutes.
• External tuner (satellite/cable box) start time
must not be earlier than the recorder start time.
4 Select the recording mode using
[U / D].
Refer to “Recording Mode” on page 32.
• If you want to edit the time or mode press [L],
then press [U / D] to correct them.
EPG
CHANGE TO
7:00
10:00
9:00
10:00
6:01
12:01
6:00
10:00
9:00
10:00
Current Program1
Next Program1
Current Program2
Next Program2
Current Program3
Next Program3
Current Program4
Next Program4
Current Program5
Next Program5
Channel1
Channel2
Channel3
Channel4
Channel5
EPG
6:01
12:01
12:59
18:01
19:00
20:00
20:33
21:00
21:30
22:00
23:00
Program1
Program2
Program3
Program4
Program5
Program6
Program7
Program8
Program9
Program10
Program11
Thursday 2/22
Channel3
EPG
Timer
Next
CHANNEL Program3
OPEN TIME 2007/12/1 19:00-20:00
Program information is displayed as follows.
AV2
(
DECODER
)
AV1
(
TV
)
ANALOG
AUDIO OUT
COMPONENT
VIDEO OUTPUT
ANALOGDVB-T
OUT
IN
ANTENNA
PB/CB
PR/CR
Y
L
R
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
HDMI OUT
Scart cable (not supplied)
External tuner
(not supplied)
Satellite Link
To Standby Mode
Start
0:00
Mode
XP
E7J70BD_EN.book Page 42 Monday, May 7, 2007 3:31 PM