Filter
Top Products
20
EN
Selecting Progressive Scan (576p/480p or
Interlaced 576i/480i) Playback
• If your TV is compatible with progressive scanning
(576p/480p), connect the TV to the COMPONENT
VIDEO OUTPUT jacks of this unit and set “Video
Out” setting to “Component Progressive (P)” in the
setup menu. (See page 74.) Next, set your TV to the
progressive scan mode.
• If your TV is not compatible with progressive scan,
set “Video Out” setting to “Component Interlace (I)”.
• Use a commercially available adaptor if the Video
input jacks of your TVs or monitors are the BNC
type.
Using the COMPONENT VIDEO OUTPUT
jacks and the ANALOG AUDIO OUT jacks
If your TV has Component Video input jacks, use a
Component Video cable, and an Audio Cable (to
connect the ANALOG AUDIO OUT jacks).
• Component connection provides the better quality
picture.
1 Follow step 1 to 2 on page 19.
2 Connect COMPONENT VIDEO
OUTPUT jacks of this unit to the
Component Video input jacks of your
TV. Use a commercially available
Component video cable.
3 Connect the AUDIO OUT jacks of this
unit to the analogue Audio input
jacks of your TV. Use a commercially
available Audio cable.
• After you have made the connections, set the “Video
Out” setting. (See page 74.)
Note for a TV with no Scart socket:
• This unit has no RF modulator, so this type of TV
cannot be used.
• Only component and HDMI connections are
compatible with the Progressive Scan.
Connection to a TV with an HDMI
Compatible Port
[HDMI CONNECTION]
A simple 1-cable connection with a device having an
HDMI (high-definition multimedia interface) connector
allows digital transfer of the digital images of
DVD-video and other devices. This is the best method
to connect this unit. It can minimise the deterioration
of image quality.
Use the HDMI cable (commercially available) for
connection.
Connect the HDMI output jack of this unit to the HDMI
input jack of TV.
Selecting HDMI mode
Press [HDMI] to select the HDMI output mode. The
output mode changes as follows every time [HDMI] is
pressed. 576p (PAL)/480p (NTSC) → 720p → 1080i
→ 1080p (The HDMI mode that is not supported by
display device will be skipped.)
Actual Output Modes by Media
For audio CD, video CD and MP3 files, 2 channel
PCM will be output regardless of the “Dolby Digital”
setting.
If the connected device is not compatible with HDMI
BITSTREAM, audio will be output as PCM even if you
select “Stream” in “Dolby Digital” setting (Refer to
pages 71-72).
Copyright protection system
To play back the digital video images of a DVD via an
HDMI connection, it is necessary that both the player
and the display device (or an AV amplifier) support a
copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is
copy protection technology that comprises data
encryption and authentication of the connected AV
device. This unit supports HDCP. Please read the
operating instructions of your display device (or AV
amplifier) for more information.
*HDMI: High Definition Multimedia Interface
AV2
(
DECODER
)
AV1
(
T
V
ANALOG
AUDIO OUT
COMPONENT
VIDEO OUTPUT
ANALOGDVB-T
OUT
IN
ANTENNA
PB/CB
PR/CR
Y
L
R
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
HDMI OUT
YP
B
/C
B
P
R
/C
R
Component
Video IN
AUDIO IN
Audio cable
(not supplied)
Component
Video Cable
(not supplied)
Audio recording format
of the disc
Dolby Digital
setting of this unit
Actual output
DVD-video
Dolby
Digital
PCM 2channel PCM
Stream Dolby Digital
LPCM
PCM
2channel PCM
Stream
DivX
®
Dolby
Digital
PCM 2channel PCM
Stream Dolby Digital
MP3 / MP2
PCM
2channel PCM
Stream
HDMI IN
HDMI OUT
TV
To HDMI
input jack
this unit
HDMI cable (not supplied)
E7J70BD_EN.book Page 20 Monday, May 7, 2007 3:31 PM