Filter
Top Products
6F8A0917
-
113
-
No. Parameter name Initial setting values
H1 Count rate Meter size 1/10" to 1/4" (2.5 to 6 mm) 1L
Meter size 1/2" to 1 1/2” (15 to 40 mm) 0.01m
3
Meter size 2" to 4” (50 to 100mm) 0.1m
3
Meter size 6” to 24” (150 to 600mm) 1m
3
Meter size 28” to 120” (700 to 3000mm) 10m
3
H2 Pulse width setting mode AUTO
H3 Pulse width 100 ms
I1 Preset count value 00000000
I2 Preset output function HOLD
J1 High limit alarm setting OFF
J2 High limit alarm value 0.0 %
J3 Low limit alarm setting OFF
J4 Low limit alarm value 0.0 %
K1 High-high limit alarm setting OFF
K2 High-high limit alarm value 0.0 %
K3 Low-low limit alarm setting OFF
K4 Low-low limit alarm value 0.0 %
L1 Fluid empty alarm ON Detection level: NORMAL
(In the case of LF232*F; OFF)
L2 Self-diagnosis function ON
L3 Alarm output factor setting WITHOUT EMP (fluid empty alarm not included)
0.0 % M1 Rate-of-change limit
For partially filled pipes detectors: 10 %
0 s M2 Control time
For partially filled pipes detectors: 10 s
N1 Fixed value output function OFF
O1 Zero offset 0.0 %