Filter
Top Products
6F8A0917
-
17
-
4.2 How to Install the Converter
The converter can be mounted on a panel, wall or on a pipe stand. Install the converter so that the front
of the converter cover stays vertically straight and the cable ports of the converter stay at the bottom.
Figure 4.1 shows an example of panel and wall mounting installation and Figure 4.2 shows an
example of pipe stand installation.
Figure 4.1 Example of Panel and Wall Mounting
2.91(74)
14.57 (370)
14.57(370)
2.91(74)
M10 bolt, etc.
Wall surface, etc.
Mounting Hole Dimensions
φ0.43 (φ12) hole
φ0.43 (φ12)
(M10 mounting holes)
Unit: inch (mm)