Filter
Top Products
6F8A0917
-
56
-
No. Setting item Display example
8.2.16
Preset count value
Output function setting
I1: PRESET CNT
I2: PRESET FNC
00009000
1:HOLD
High/Low limit alarm On/Off
High/Low limit alarm value
J1: H ALM SET
J2: H ALM VAL
1:ON
+100.0 %
8.2.17
High high/Low low limit alarm On/Off
High high/Low low limit alarm value
K1: HH ALM SET
K2: HH ALM VAL
1:ON
+110.0 %
8.2.18 Fluid empty alarm
L1: EMPTY ALM 1:NORMAL
Self-diagnosis On/Off
L2: SELF CHECK 1:ON
8.2.19
Alarm output factor setting
L3: ALM PRESET 1:WITHOUT EMP
8.2.20
Rate-of-change limit value
Control time
M1: LIMIT RATE
M2: LIMIT TIME
05.5 %
01 s
8.4 Fixed value output (Loop check)
N1: FIXED OUT
N2: FIXED CURR
N3: FIXED PULSE
OFF
20.0 mA
1000 pps
8.5.2 Zero offset adjustment
O1: MANUAL ZERO -000.1 %
8.2 Parameters Check / Change
8.2.1 Exciting Current Value
The exciting current value is already adjusted when the product is shipped from the factory. Normally the
exciting current value is set to the same value as described on the detector nameplate.
Checking the exciting current value
Proceed as follows to check or change the exciting current value.
Switch operation Display example Description
A1: EX. CURR.
0.2100A
Select A1: EX. CURR. from the setting item selection menu.
The currently set exciting current value appears.
A
1: EX. CURR.
Returns to the menu of setting item selection.