Filter
Top Products
6F8A0917
-
52
-
Example of totalizer operation
Switch operation Display example Description
−
10.00 m/s
100.0%
(Measurement mode)
ENTER111
0
00 V****
Pressing
MENU/ENT
in the measurement mode for 3 seconds
or more, the screen moves to the menu lock cancellation
screen.
* Pressing
CANCEL
in the mode selection screen, the mode
returns to the measurement mode.
ENTER111
111
V****
Set the menu lock cancellation cord [111] by
pressing
and .
* Pressing
CANCEL
in the mode selection screen, the mode
returns to the measurement mode.
>1:SET
2:CNT CTRL
Press
MENU/ENT
longer for 3 seconds.
1:SET
>2:CNT CTRL
Select
CANCEL
in the mode selection screen.
COUNT CTRL
F 1000 m3
The totalizer operation screen appears.
COUNT CTRL
F 1000 m3 C
Pressing
when the totalizer is stopped, the totalizer starts.
* “C” mark appears indicating that the totalizer has started.
COUNT CTRL
F 1000 m3
Pressing
while the totalizer is in operation, the totalizer
stops.
* “C” mark disappears.
COUNT CTRL
F 0 m3
Pressing
, the totalizer will be reset to zero.
* If the totalizer is reset, the count value cannot be returned to
the previous value.
10.00 m/s
100.0 %
Pressing
CANCEL
returns you to the measurement mode.
Note1: There is not this screen to the converter before serial No.072320999.
There is not software version (V****) to the converter before version V0109.
Note1
Note1