Filter
Top Products
6F8A0917
-
1
-
NOTICE
Thank you very much for your purchase of our LF232 Type Electromagnetic Flowmeter
Converter.
This instruction manual describes about the precautions required when using the LF232
converter, installation, configuration and maintenance. It is intended for the personnel in
charge of the installation, operation and maintenance.
To use this product properly and safely, read this manual carefully before using this product.
After reading this manual, store it in a place where it can be referred to
whenever needed.
Toshiba LF232 electromagnetic flowmeter converters can be used in combination with
various types of electromagnetic flowmeter detectors.
For the notes on usage, piping, installation, configuration and maintenance of the combined
detector, check the model number of the combined detector and read the instruction manual of
the relevant detector.
About Safety Precautions
Read the Safety Precautions described at the front carefully and understand the contents
before using this product.
The “Safely symbols” used in the “Safety Precautions” are shown in a location such as in the
margin to the left of the corresponding commentary in the main text.
This product does not conform to standards for overseas specific areas such as CE mark used
in the EU market. Be careful that this product cannot be shipped to such areas where those
standards are required.
NOTES
1. The reproduction of the contents of this Manual in any form, whether wholly or in part,
is not permitted without explicit prior consent and approval.
2. The information contained in this Manual is subject to change or review without prior
notice.
3. Be sure to follow all safety, operating and handling precautions described in this
Manual and the regulations in force in the country in which this product is to be used.
2
nd
Edition August, 2008
First Edition June, 2008