Filter
Top Products
6F8A0917
-
67
-
Checking the normal indicating unit
The following is an example to change the main indicating unit (UNIT1) from % to ml/s.
In the case of sub unit (UNIT2), select the function “B2: UNIT 2.”
Switch operation Display example Description
B1: UNIT 1
%
Select B1: UNIT 1 from the setting item selection menu.
The currently set main indicating unit (% in this example)
appears.
B1: UNIT 1
%
The cursor appears.
B1: UNIT 1
m
l B
Change the volumetric unit to ml. (Note 1)
B1: UNIT 1
ml
B
Move the cursor to the position of time unit.
B1: UNIT 1
ml/s
Change the time unit to s. (Note 2)
B1: UNIT 1
ml/s
The display blinks and the set value is displayed for
confirmation.
Press
MENU/ENT
again to write the data. Then the cursor
disappears and the display returns to the condition that the
setting value is displayed.
B
1: UNIT 1
Returns to the menu of setting item selection.
Note 1: Volumetric unit is displayed cyclically as follows:
Note 2: Time unit is displayed cyclically loops as follows:
%m
3
ml
RANGE COUNT ft/s
l
gal
bbl
m/s
pt
qt
/
s
/
min
/
h
/
d (Space)