Filter
Top Products
6F8A0917
-
53
-
7.3.5 Maintenance Menu
If you enter the service code to release the protection, the maintenance specific items in the setting
mode that are not displayed normally can be accessed and the parameters that are normally prohibited
to be rewritten can be changed.
This function is mainly used by service personnel, it is not necessary for general customers to enter
this function.
If erroneously operated and the service code input screen appears, either press [CANCEL] to return to
the measurement mode or press [MENU/ENT] to go on to the setting menu. (In this case, protection
will not be released.)
Example to move to the maintenance menu
Switch operation Display example Description
−
10.00 m/s
100.0 %
Measured value being displayed (measurement mode)
ENTER111
0
00 V****
Pressing
MENU/ENT
in the measurement mode for 3 seconds
or more, the screen moves to the menu lock cancellation
screen.
* Pressing
CANCEL
in the mode selection screen, the mode
returns to the measurement mode.
ENTER111
111
V****
Set the menu lock cancellation cord [111] by
pressing
and .
* Pressing
CANCEL
in the mode selection screen, the mode
returns to the measurement mode.
>1:SET
2:CNT CTRL
Pressing
MENU/ENT
for 3 seconds or more in the
measurement mode, the screen moves to the mode selection
screen.
INPUT SRV_CODE
0
00
Select 1:SET in the mode selection screen and press
MENU/ENT
for 5 seconds or more, then the screen appears
that is used to enter the service code to release the protection.
Pressing
CANCEL
in the mode selection screen brings you
back to the measurement mode.
A
1:EX CURR
Enter the service code and if it is correct, the maintenance
specific items in the setting menu can be accessed.
Pressing
CANCEL
in the service code input screen brings you
back to the mode selection screen.
Note1: There is not this screen to the converter before serial No.072320999.
There is not software version (V****) to the converter before version V0109.
Note1
Note1