Filter
Top Products
6F8A0917
-
46
-
7.3.2 Setting Mode Operation
Proceed as follows to select the desired item and check or change the setting values.
* Switch operation indicates the switches to press.
Moving to the menu display
Switch operation Display example Description
−
10.00 m/s
100.0 %
Measured value being displayed (measurement mode)
ENTER111
0
00 V****
Pressing
MENU/ENT
in the measurement mode for 3 seconds
or more, the screen moves to the menu lock cancellation
screen.
* Pressing
CANCEL
in the mode selection screen, the mode
returns to the measurement mode.
ENTER111
111
V****
Set the menu lock cancellation cord [111] by
pressing
and .
* Pressing
CANCEL
in the mode selection screen, the mode
returns to the measurement mode.
>1:SET
2:CNT CTRL
Pressing
MENU/ENT
in the measurement mode for 3 seconds
or more, the screen moves to the mode selection screen.
A
1:EX CURRENT
Select 1:SET in the mode selection screen and press
MENU/ENT
. Then the menu screen appears.
* Pressing
CANCEL
in the mode selection screen, the mode
returns to the measurement mode.
B
1:UNIT 1
Pressing
, the function number (a combination of a letter
and a number) changes.
B1
:UNIT 1
Pressing , the cursor moves.
* If the cursor is positioned at the digit of number, pressing
moves the cursor to the digit of letter.
C2
:RANGE 1
Likewise, set the function number to the one you want to check
or change by pressing
and .
Note1
Note1