Filter
Top Products
6F8A0917
-
77
-
Changing the span value
The span value for each range is set.
The following is an example to show how to change the span value of Range 1 from 2.0m3/h to 100
l/min.
Switch operation Display example Description
C2: RANGE 1
2.0000 m3/h
Select C2: RANGE 1 from the setting item selection menu.
The currently set span value for Range 1 (2.0 m
3
/h in this
example) appears.
C2: RANGE 1
2
.0000 m3/h
The cursor appears.
Press
further to move the cursor to the digit of volumetric
unit.
C2: RANGE 1
2000.0 l
/h
↓
33.333 l/m
in
Change the volumetric unit to l.
Press
to move the cursor to the digit of time unit and
likewise change the unit to min. (Note)
(The span value will be automatically changed as this unit is
changed.)
C2: RANGE 1
3
3.333 l/min
Move the cursor to the desired digit to change.
C2: RANGE 1
1
3.333 l/min
↓
100.00
l/min
Change the number of the digit.
To change other digit, press under this condition to move
the cursor to that digit and change the number there.
C2: RANGE 1
100.00
l/min
The display blinks and the set value is displayed for
confirmation.
Press
MENU/ENT
again to write the data. The cursor
disappears and returns to the condition that the set value is
displayed.
C
2: RANGE 1
Returns to the menu of setting item selection.
Note: The items of unit are displayed cyclically as shown below:
• A combination of m/min, m/h , m/d, ft/min, ft/h and ft/d cannot be selected.
m
3
l
gal
ml
/
s
/
min
/
h
/
d
Volumetric unit
Time unit
bbl
m
ft
ptqt