Filter
Top Products
6F8A0917
-
68
-
Changing the flow direction for total flow
Proceed as follows to change the flow direction for total flow.
The following is an example to show how to change the main indicating unit from Forward flow
(F) to Forward/Rverse automatic switching (B).
In the case of sub unit (UNIT2), select the function “B2: UNIT 2.”
Switch operation Display example Description
B1: UNIT 1
m
3
F
Select B1: UNIT 1 from the setting item selection menu.
The currently set main indicating unit (m
3
F in this example)
appears.
B1: UNIT 1
m
3
F
The cursor appears.
B1: UNIT 1
m
3
F
Move the cursor to the position of time unit.
B1: UNIT 1
m
3
F
Move the cursor to the position of flow direction for total flow.
B1: UNIT 1
m
3
B
Change the flow direction for total flow to B (forward/reverse
automatic switching). (Note 1)
B1: UNIT 1
m
3
B
The display blinks and the set value is displayed for
conformation.
Press
MENU/ENT
again to write the data. Then the cursor
disappears and the display returns to the condition that the
setting value is displayed.
B
1: UNIT 1
Returns to the menu of setting item selection.
Note 1: The flow direction for total flow is displayed cyclically as follows:
B (Forward/Reverse automatic switching) F (Forward direction)
R (Reverse direction)