Filter
Top Products
12
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 52/62HMX95
TV back panel connections (continued)
Chapter 2: Connecting your TV
1 ANT-1 (cable) IN and ANT-2 IN — Two RF inputs that
support analog (NTSC) and digital (ATSC) off-air antenna
signals and analog and digital Cable TV (QAM) signals.
Note: If you have an antenna only, connect it to ANT-1. If you have
both cable TV and an antenna, connect the cable TV to ANT-1 and
the antenna to ANT-2.
2 HDMI
™
IN 1 and 2 — Two High-Definition Multimedia
Interface inputs receive digital audio and uncompressed
digital video from an HDMI device or uncompressed digital
video from a DVI device. See page 21. Also see item 5 on
the previous page.
3 G-LINK
®
— For use with one of the enclosed IR blaster/
G-LINK
®
cables to enable the TV Guide On Screen
®
recording features. See page 28.
{
12354
*THINC™ system
(Toshiba Home Interactive Network Connection)
The RJ-45 (Ethernet) port allows your Toshiba Cinema
Series TV to connect to your home network. This
revolutionary home entertainment networking system lets
you access MP3 audio files and JPEG picture files stored on
a networked PC (as shared files) and play/display them on
your TV.
You also can play your shared MP3 audio files through a
connected audio system.
See pages 24 and 30 and Chapters 10 and 11 for details.
4 TheaterNet IEEE1394 1 and 2 — Two bi-directional
digital IEEE1394 ports for connecting multiple devices
with compressed digital video. Because these ports are
bi-directional, they can be used for playback and recording.
You can control your IEEE1394 devices using the TV’s
TheaterNet on-screen device control icons. See pages 25–27
and 50.
Note: IEEE1394 cable carries both audio and video information;
therefore, separate audio cables are not required.
5 RJ-45 (Ethernet)* — For connecting the TV to a home
network. See page 30.