24
Chapter 2: Connecting your TV
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 52/62HMX95
Connecting a digital audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
You will need:
one pair of standard audio cables
To control the audio:
1. Turn on the TV and the stereo amplifier.
2. Turn off the TV’s built-in speakers (see “Turning off the
built-in speakers” on page 93).
Note: To hear sound when using an external audio amplifier,
the volume of both the TV and the amplifier must be set to a
reasonable listening level.
TV
Analog audio amplifier
Connecting an analog audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby*
Digital
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby Digital
decoder or other external audio system with optical audio input.
You will need:
one optical audio cable (Use an optical audio cable that has
the larger “TosLink” connector and not the smaller
“mini-optical” connector.)
To control the audio:
1. Turn on the TV and the digital audio device.
2. Press MENU on the
TV’s remote control
and open the AUDIO
menu.
3. Highlight Audio Setup
and press ENTER.
4. In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device (see “Selecting
the optical audio output format” on page 93).
Audio Setup
MTS Stereo
Language English
Reset
Done
Speakers On
Optical Output Format
Dolby Digital
5. Turn off the TV’s built-in speakers in the same Audio Setup
menu (above). Also see “Turning off the built-in speakers”
on page 93.
TV
Dolby Digital decoder or
other digital audio system
Note:
• Some audio systems may not be compatible with Dolby Digital bitstream
signals. Older audio systems that are not compatible with standard
optical out signals may not work properly, creating a high noise level
that may damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal outputs signals only when receiving
digital broadcasts with the TV in single-window mode.
• The DIGITAL AUDIO OUT terminal may not output some digital audio
sources because of copy restrictions.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
LINE IN
Optical
Audio IN
LR
LINE IN
LR
___________
*Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.