Filter
Top Products
37
Chapter 3: Using the remote control
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 52/62HMX95
Numbers
MODE
VOL yz
Programming the remote control to operate your other devices (continued)
RECALL
Operational feature reset (8900)
This feature clears all programmed remote control features not
related to “Device code setup” and resets the volume lock to the
“TV” device mode.
To reset the remote control:
While holding down the RECALL button, press 8, 9, 0, 0.
The mode indicator will blink two times, pause, and then
blink two more times.
Using the volume lock feature (8000)
By default (factory setting), the remote control’s volume keys
(VOL yz and MUTE) are locked to the “TV” device mode.
The remote control will operate the TV’s volume, even when
“TV” is not the current device mode. (This includes all remote
control device modes except AUDIO 1 and AUDIO 2).
If you unlock the remote control’s volume keys, each device
mode will have its own volume (if the device ID has volume
data). The remote control will operate the volume of the device
associated with the current device mode. (This includes all
remote control device modes.)
If you lock the remote control’s volume keys to a specific device
mode, the remote control will operate the volume of the device
associated with the locked mode, even when the locked mode is
not the current device mode. (This includes all device modes
except AUDIO 1 and AUDIO 2).
When the remote control is in AUDIO1 (or AUDIO 2) mode,
the remote control will operate the volume of the device
associated with the AUDIO 1 (or AUDIO 2) mode, even when
the volume is locked to another mode.
See “Using the remote control MODE button to control your
other devices” on page 33.
To lock the remote control’s volume keys to a specific mode
(CBL/SAT in this example):
1. Repeatedly press MODE to select CBL/SAT mode.
2. While holding down the RECALL button, press 8, 0, 0, 0.
3. Press VOL y.The CBL/SAT mode indicator will blink two
times (locked).
The remote control’s volume keys will now operate the
volume of the device associated with the CBL/SAT mode,
even when CBL/SAT is not the current device mode (for all
device modes except AUDIO 1 and AUDIO 2).
To unlock the remote control’s volume keys:
1. While holding down RECALL, press 8, 0, 0, 0.
2. Press VOL z. The CBL/SAT mode indicator will blink four
times (unlocked).