Filter
Top Products
93
Chapter 8: Using the TV’s features
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 52/62HMX95
Turning off the built-in speakers
You can use this feature to turn off the TV speakers when you
connect an audio system to your TV (see “Connecting a digital
audio system” and “Connecting an analog audio system” on
page 24).
To turn off the built-in
speakers:
1. Press MENU and open
the Audio menu.
2. Highlight Audio Setup
and press ENTER.
3. In the Speakers field,
select Off.
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To turn on the built-in speakers:
Select On in step 3 above.
Adjusting the audio (continued)
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
Done
Audio Setup
MTS
Language
Speakers On
Optical Output Format Dolby Digital
Reset
Stereo
English
Selecting the optical audio output
format
You can use this feature to select the optical audio output format
when you connect a Dolby Digital decoder or other digital
audio system to the Optical Audio Out terminal on the TV (see
“Connecting a digital audio system” on page 24).
To select the optical audio output format:
1. Press MENU and open the Audio menu.
2. Highlight Audio Setup and press ENTER.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
3. In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device.
Done
Audio Setup
MTS
Language
Speakers On
Optical Output Format
Dolby Digital
Reset
Stereo
English
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.