Toshiba 62HMX95 Projection Television User Manual


 
95
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 52/62HMX95
Chapter 8: Using the TV’s features
Using the PC settings feature
You can view the image from a PC on the TV screen. The PC
must be connected to the TVs PC IN terminals. (See page 29
for connection details.)
You can use the PC Settings feature to adjust the pictures
horizontal position/size, vertical position/size, clock phase, and
sampling clock.
Note: If a PC is not connected, this feature will be grayed out
in the Input Selection screen and Setup menu.
To adjust the PC settings:
1. Repeatedly press INPUT to select PC input mode. (See
Selecting the video input source to view on page 72.)
2. Press MENU and open the Setup menu.
3. Highlight PC Settings and press ENTER.
Navigate
Select
Back Exit
CH RTN
EXIT
Installation
Sleep Timer
On/Off Timer
Setup
PC Settings
HDMI 1 Audio
Auto
Auto
2 Sec
HDMI 2 Audio
Slide Show Interval
4. Press y or z to highlight the item you want to adjust.
5. Press x or to make the appropriate adjustments.
Done
PC Settings
Horizontal Width 0
Vertical Position
Reset
Horizontal Position 0
0
0
0
0
Vertical Height
Clock Phase
Sampling Clock
• Horizontal Position:
Moves the picture left/right.
The adjustment range is within ±5 from center.*
• Vertical Position:
Moves the picture up/down.
The adjustment range is within ±5 from center.*
• Horizontal Width:
Adjusts the width of the picture.
The adjustment range is within ±5 from center.*
• Vertical Height:
Adjusts the height of the picture.
The adjustment range is within ±5 from center.*
• Clock Phase:
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±15 from center.*
• Sampling Clock:
Helps to minimize periodic vertical stripes on the screen.
The adjustment range is within ±15 from center.*
___________
*The range of adjustment may vary slightly.