Filter
Top Products
Contents Index
Contents
13
Index
13
SETTING UP YOUR CINTIQ
Your Cintiq 22HD interactive pen display functions as both a display and a pen tablet. Follow the
instructions below to complete the hardware and software installation.
Important: You MUST install the Wacom driver software for correct pen-on-screen functionality.
System requirements
Step 1: Hardware installation
Step 2: Software installation
SYSTEM REQUIREMENTS
Make sure your computer meets the following minimum system requirements:
•PC
. Windows 7, Vista (SP2 or later), XP (SP3 or later). 32 or 64-bit configurations. DVI or VGA port.
Available USB port and CD-ROM drive.
•Mac
. OS X, v10.5.8 or later. Intel-based platforms only are supported. DVI or VGA port, or appropriate
Mini DisplayPort to DVI adapter. Available USB port and CD-ROM drive.
Cintiq supports digital (DVI) and analog (VGA) video signals. For optimum performance, connect Cintiq to
a digital video card.
VGA connection is not recommended as the display quality will not be as good as with a digital connection.
VGA connection requires that you obtain an appropriate DVI-I to VGA adapter cable. Check with your local
product retailer or an online outlet.
Notes:
Cintiq can be used alone or with another display, such as a CRT monitor or LCD projector. To use
Cintiq with another display, you will need two video cards or a video card with dual output.
You may be able to set up Cintiq as a mirrored, extended, or independent display. When working
with more than one monitor, Cintiq will map to the monitors based upon how your system is
configured. By default, if you are in mirror mode, the pen display will map to the entire space on
each monitor. See your hardware and operating system documentation for details on configuring
your system for use with multiple monitors.
A Display Toggle
function is available for use with multiple display systems. This enables you to
toggle the screen cursor between Cintiq and your other displays.