Filter
Top Products
Contents Index
Contents
95
Index
95
Replace a cable
:
1. Connect the cable to the pen display. Make sure to tighten any connector thumbscrews.
2. Properly seat the cable and install the cable clip.
3. Carefully replace the rear cover, making sure not to crimp any cables beneath it. Use the correct
screws when replacing the cover, and do not overtighten them.
4. Carefully reinstall the bearing hub. For details, refer to the instructions found in using an alternate
mount or stand.
5. Mount Cintiq on the display stand
.
6. Reconnect the cabling between Cintiq and your computer.