Filter
Top Products
Contents Index
Contents
26
Index
26
POSITIONING
CLICKING
To position the screen cursor, move the pen slightly above
the Cintiq display screen without touching the screen
surface. Press the pen tip on the display screen to make a
selection.
Note: Calibrating the pen display
ensures correct alignment
of the screen cursor with the pen tip. If the screen
cursor does not jump to a position near the pen tip
when you place the pen on the display screen, then
the pen display software driver may not be installed
or is not loading. Install the driver software if
necessary. Otherwise, see troubleshooting
.
Tap the display screen once with the pen tip, or touch the pen to
the display screen with enough pressure to register a click.
Tip
: Configure Windows to select when hovering the pen over
an icon and to launch the icon with a single click. To turn
on this feature, first open a folder.
Windows 7 and Vista
: From the ORGANIZE pull-down menu
choose F
OLDER AND SEARCH OPTIONS. From the GENERAL
tab select S
INGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).
Windows XP
: From the TOOLS pull-down menu choose
F
OLDER OPTIONS.... From the GENERAL tab select SINGLE-
CLICK TO OPEN AN ITEM (POINT TO SELECT).
Press the upper side switch
(when set to D
OUBLE CLICK),
or quickly tap the display
screen twice in the same
place with the pen tip.
Double-clicking is easier
when using the pen
perpendicular to the pen
display screen.