Filter
Top Products
Contents Index
Contents
93
Index
93
5. Study the bearing hub components. You should have two bearing hub sections, a bearing stopper, and
four screws. Locate the bearing stopper within one of the bearing hub sections. Either hub section can
be used as they are identical parts.
6. Taking care not to dislodge the bearing stopper from the hub section, position the two halves of the
bearing hub together around the pen display cables and over their attachment points.
7. Attach the bearing hub sections to the pen display, making sure to use the correct screws for
reattachment. (The bearing hub screws are longer than the rear cover screws.)
Illustrates correct location of
bearing stopper within bearing
hub section.
When correctly placed, the bearing stopper will shift
smoothly from side to side within the stopper
groove. The stopper will also sit flush with the rear
hub surface.
Proper positioning shows the hub sections
aligned along the horizontal axis of the pen
display.
The section containing the bearing stopper
should be positioned toward the top of the
pen display.