Filter
Top Products
Contents Index
Contents
92
Index
92
4. Review the instructions that came with your stand or mounting platform. Be sure you understand them,
and follow all instructions carefully. Pay attention to any cautions or other safety information.
5. Using the appropriate VESA mounting screws for your platform and as indicated above, firmly attach
the pen display to the mounting platform.
6. Reattach the cabling between the pen display and your computer. As necessary, refer to step 1:
hardware installation.
To remove the pen display from a VESA mount
:
1. Turn off your computer and power off Cintiq. Then disconnect all cables from between Cintiq and your
computer.
2. Remove Cintiq from the alternate mounting platform.
3. Place the pen display face down on a flat, soft surface (such as a cloth spread across a desktop).
4. Remove the rear cover and unthread the cables from the cable channel. After freeing up the cables,
replace the cover.
Warning
When attaching the pen display onto an alternate
mounting platform, be sure to follow all instructions in
the documentation supplied by the platform
manufacturer. If improperly installed, the pen display
could fall, resulting in physical injury or damage to the
product.
Cable channel
Cables should be threaded through this
opening without crimping.
Ensure the cables are not pinched beneath
the VESA attachment.