Filter
Top Products
System setup
129
System setup
3 Press OPEN/CLOSE to open the disc tray.
4 Place the update CD in the disc tray.
The MusicCAST server checks the update CD content.
If the MusicCAST system can verify the validity of the update
CD the start update prompt appears on the on-screen display.
5 Use / to move the cursor to “Start” and
press SELECT.
The System Update screen appears on the on-screen display,
and the system update process begins.
6 Follow the directions on the on-screen display.
When the update process is complete, press
STANDBY/ON.
7 Press STANDBY/ON once again to turn the
MusicCAST server on.
The update process is complete.
You can reset all of the parameters in the MusicCAST server to their factory defaults. This will not delete any of
the data in the MusicCAST server.
1 Follow the procedure described on page 117
“Opening the system setting screens” to
display the System Setup screen.
2 Use / to move the cursor to “System
Utilities” and press SELECT.
The System Utilities screen appears on the on-screen display.
3 Use / to move the cursor to “System Reset”
and press SELECT.
The System Reset screen appears on the on-screen display.
4 Use / to move the cursor to “Yes” and press
SELECT to reset the MusicCAST server.
The MusicCAST server resets to default parameters and
restarts.
Move the cursor to “Cancel” and press SELECT to cancel the
reset process and return to the System Utilities screen.
HINT
HINT
Press BACK to return to the previous screen.
Resetting the MusicCAST server to factory defaults