Filter
Top Products
Playback
50
You can listen to material from external components, such as MD players, connected to the MusicCAST server.
Check that the external component is correctly connected to
the MusicCAST server before you carry out this procedure.
1 Press TOP MENU.
The Top Menu screen appears on the on-screen display.
2 Use / to move the cursor to “Library” and
press SELECT.
The Library screen appears on the on-screen display.
3 Use / to move the cursor to “External
Inputs” and press SELECT.
The External Input screen appears on the on-screen display.
4 Use / to select “Input monitor” and press
SELECT.
A screen prompting you to choose an input appears on the on-
screen display.
5 Use / to select the component you want to
listen to.
•“Optical”
For components connected to the OPTICAL IN jack on the
MusicCAST server.
•“Coaxial”
For components connected to the COAXIAL IN jack on the
MusicCAST server.
•“Analog”
For components connected to the ANALOG IN jacks on the
MusicCAST server.
The component you select appears on the on-screen display.
6 Start playback on the external component.
Refer to the service manual for your component for
information on its operation.
HINT
HINT
• You can access the External Input screen directly by
pressing EXT.INPUTS.
• You cannot change to another external input when the
MusicCAST server is already recording from an external
input.
Using the MusicCAST server to listen to external
components