Filter
Top Products
Using the MusicCAST with a YAMAHA AV receiver
91
Using the MusicCAST with a YAMAHA AV receiver
[
You can set the MusicCAST receiver to automatically change the surround program settings on a YAMAHA AV
receiver for each genre it plays back. This allows you to choose the setting that most suits a specific genre.
Carry out the following procedure to set a surround sound effect for a genre.
1 Carry out the procedure described on page 67
to open the editing submenu for the genre you
wish to register a surround setting to.
2 Set your YAMAHA AV receiver to the surround
program setting you want to use (refer to the
ownerfs manual for your AV receiver for
information on how to do this).
3 Use / tto move the cursor to “Set program”
and press SELECT. A message showing that
the registration process is complete appears on
the on-screen display.
To delete the genre surround program setting, repeat steps 1-3
above, selecting “Clear program” in step 3 in place of “Set
program”.
NOTE
You can view the surround setting assigned to a genre by
viewing the information screen.
Automatically adjusting AV receiver surround effect settings
for a genre