Filter
Top Products
90
Using the MusicCAST with a YAMAHA AV receiver
If you connect a YAMAHA receiver to your MusicCAST server using a cross type RS-232C cable, the
MusicCAST server can control the volume, change inputs and effect programs, and perform other
operations in combination with the receiver, as well as transmit radio broadcasts from YAMAHA AV
receivers to MusicCAST clients.
1 Press TOP MENU.
The Top Menu screen appears on the on-screen display.
2 Use / to move the cursor to “AV Receiver”
and press SELECT.
The AV Receiver screen appears on the on-screen display.
The contents of the display depends on the type of YAMAHA
AV receiver you connect to the MusicCAST server.
3 Use / to move the cursor to the parameter
you want to change.
•“Standby/On”
Switches the receiver between ON and STANDBY modes.
•“Vol”
Adjusts the volume of the output from the receiver.
•“Inputs”
Selects an input for the receiver to use.
•“Programs”
Selects the DSP program the receiver applies to its sound
output.
•“Presets”
Selects a tuner preset from amongst those stored on a
receiver.
4 Use / to change the setting of the
parameter.
HINT
HINT
• You can set the input channel that the MusicCAST server
uses on the receiver (see page 122).
• You can set the MusicCAST server to change the DSP
program of the receiver to a specific setting for each song
(see page 91).
• The MusicCAST server can display a list of the YAMAHA AV
receivers it can control (see page 133).
• You can set the MusicCAST server to turn the receiver
power on whenever you turn the MusicCAST server power
on. (see page 122)
• Set the 6 channel input parameter on your receiver to
“OFF”.
RS-232C
RS-232C