Filter
Top Products
78-8130-6150-0 Rev G 47
Step 3. Press Menu/OK
− The selected template will be displayed.
− The arrow on the right side of the display
indicates there is more information than can
be displayed on the screen (scroll down by
pressing the down arrow [SK]).
Step 4. Enter user information that will be written to
this marker. (See 15.A Modifying Marker Data to be
Written)
Step 5. Verify that all information is correct
Step 6. Hold the locator directly over the top of the
marker. The locator should be within the following
maximum writing ranges for each
of the different 3M
™
iD Marker formats;
− Near Surface iD Marker = 6 in (15 cm)
maximum
− Ball iD Marker = 12 in (30 cm) maximum
− Full Range iD Marker = 24 in (61 cm)
maximum
Step 7. Press Start Write [SK].