Filter
Top Products
50 78-8130-6150-0 Rev G
Step 6. The operator may select User Edit in order
to ‘type’ the modification, or Delete Row to
remove the entire row from the template, or
select Show All to display a list of common
compressed terms.
Note: Using a common compressed term requires
less memory in the marker.
Step 7. Select an option from the list by pressing the
up/down arrows [SK]. Press Locate/OK [5].
Step 8. If User Edit is selected, the following
display will appear.
Step 9. Move the boxed cursor to the ‘back arrow’
and press Select [SK] to delete the entry to
be modified.
Step 10. Move the boxed cursor by pressing the left/
right arrows [SK], or the Up/ Down Arrow
[SK], to move the cursor to the next row.
Step 11. Press Select [SK] to enter the alphanumeric
character.
− Entry will appear at the top of the display.
Step 12. Press Locate/OK [5] when entry is complete.
Step 13. If Show All is selected, the following display
will appear.
Step 14. Select a common compressed term from the
list by pressing the up/down arrows [SK].
Step 15. Press Locate/OK [5]. The modification will
automatically populate the marker template.
16. Reading 3M
™
iD Markers
The operator can retrieve the data from the iD marker by pressing Read [SK] on the
Marker Locate display.
The receiver tip should be lowered to the ground to reach maximum read depth.
If more than one 3M
™
iD Marker of the same utility is detected, the receiver will read
the first marker and display the data from the marker.