Filter
Top Products
6 78-8130-6150-0 Rev G
1. Safety Information
Please read, understand and follow all safety information contained in these instructions
prior to the use of the 3M
™
Dynatel
™
Cable/Pipe/Fault Advanced M-Series Locator.
Retain these instructions for future reference.
A. Intended Use
The 3M Dynatel Cable/Pipe/Fault Advanced M-Series Locator is used to identify the
placement of underground utility lines. The system must be installed as specified in
the 3M Dynatel Cable/Pipe/Fault Advanced Locator 2250M/2273M Series Operator
Manual. It has not been evaluated for other uses or locations. If this equipment is used
in a manner not specified by 3M, the protections provided by the equipment may be
impaired.
Explanation of Signal Word Consequences
! Warning:
Indicates hazardous situation which if not avoided, could result in
death or serious injury.
! Caution:
Indicates hazardous situation which if not avoided, could result in
minor or moderate injury.
Explanation of Product Safety Label Symbols
Do not throw away in normal trash.
F
Warning: Risk of electric shock
! WARNING
This WARNING applies to the following 3M Dyna-Couplers;
• 3" (75 mm) - Part number 3001
• 4.5" (114 mm) - Part number 4001
• 6" (150 mm) - Part number 1196
• All accessory kits containing any of the listed Dyna-Couplers - Part numbers 3019, 4519,
1196/C
A potential for electrical shock exists when using the Dyna-Coupler on cables energized with
electrical power. Use appropriate safety procedures.
DO NOT USE ON CABLES CARRYING IN EXCESS OF 600 VOLTS RMS.