Filter
Top Products
98 Chapter 2
Functional Tests
Test Equipment
Functional Tests
TEST EQUIPMENT
The table below summarizes the test equipment needed to perform all of the functional
tests. Alternate equipment model numbers are given in case the recommended equipment
is not available.
If neither the recommended nor the alternative test equipment are available, substitute
equipment that meets or exceeds the critical specifications listed.
Analyzer
Item Critical Specifications
Recommended
Agilent Model
Alternate
Agilent
Model
Adapters
PSA ESA 3.5 mm (f) to 3.5mm (f)
(connector saver for
83630B)
5061-5311
PSA ESA 3.5 mm (f) to N (f) 1250-1745
PSA 2.4 mm (f) to 3.5 mm (m) E4446A, E4448A only
11901D
PSA BNC (f) to SMA (m) 1250-1200
PSA BNC (m) to SMA (f) 1250-1700
ESA BNC (m) to SMA (f) 1250-2015
PSA ESA Type N (f) to BNC (m) 1250-1534
PSA Type N (f) to N (f) 1250-1472 1250-0777
PSA ESA Type N (m) to 3.5 mm (f) 1250-1744
PSA ESA Type N (m) to 3.5 mm (m) 1250-1743
PSA Type N (m) to BNC (f) 1250-1476
ESA Type N (m) to BNC (f) 1250-0780
Attenuators
PSA 10 dB Step Attenuator Range: 0 to 60 dB 355D
PSA 20 dB Fixed Attenuator Accuracy: < 0.5 dB 8491A 8491B
Cables
PSA ESA APC 3.5 mm (1 meter) 8120-4921
ESA APC 3.5 mm E4407B and E4408B only 11500E
ESA APC 3.5 mm 11500D
ESA Type-N, 152-cm (60-in) 11500D
ESA APC 3.5 mm E4407B and E4408B only 11500E