Filter
Top Products
127
• Press the MODE button to go to the next submenu.
To define the values for the minimum and maximum
aperture of the lens (if controlled by the WRC-1), use
the SEL and SET buttons and the handwheel, as
described above.
The first display line shows the value for the left end-stop,
the second line shows the value for the right end-stop.
• If the defined values result in a constant exposure, the
display shows ‘CONST LIGHT’ when the MODE button
is pressed. If this reading is not shown, the exposure is
altered while the handwheel is adjusted.
• Press the MODE button to go back to the main menu.
Controlling the Camera Speed