ARRI WRC-1 Universal Remote User Manual


 
171
7. Quick guide
This quick guide is aimed at users who have
already read the instruction manual, and who
are very familiar with the system.
Warning: no reference is made in this chapter
to possible operating errors this chapter
therefore does not include any warnings!
for iris control additionally
CLM-2 ..................................................... K2.52036.0
possibly with console................................. K2.52035.0
Note: CLM-1 motors cannot be used as iris motors
for the WRC-1.
In order to operate the WRC-1 the following EPROM
versions must be used:
WMU: ........................................... 01.50 or higher
UMC:............................................. 01.50 or higher
ARRIFLEX 435 .................................... 2.4 or higher
The dovetail adapter (K2.52080.0) can be used to firmly
attach the UMC-1 to the camera.
The UC-C1 cable links the UMC-1 and the RS socket on
the camera, while the UC-R1 cable connects the UMC-1
and the CCU socket. Set the PS-CCU/NORM switch on
the camera to PS-CCU.
System components required
for cable operation
WRC-1 .................................................... K2.52087.0
WC-W1-S cable ....................................... K2.52089.0
WHA-1.................................................... K2.52070.0
7.1 Connecting the devices
System components required
for wireless operation
WRC-1 .................................................... K2.52087.0
WMU-1 ................................................... K2.52052.0
with WBU-2 battery .................................. K2.52088.0
WAC-1 charger........................................ K2.52072.0
UMC-1 .................................................... K2.52040.0
with UC-C1 cable [K2.52047.0 as replacement]
dovetail adapter ....................................... K2.52080.0
URM-1 ..................................................... K2.52048.0
UC-R1 cable............................................. K2.52079.0
Quick Guide