Filter
Top Products
26
5.1.2 WRC mode
In this mode the WRC-1 offers convenient and quick access
to camera functions and additional programming options.
• Set the sliding switch on the camera from NORM to
PS/CCU ➪ photo.
The display of the WRC-1 flashes with the warning
‘not PSCCU’ until the camera’s sliding switch is set to
PS/CCU.
• Set the WRC/CAM sliding switch to WRC ➪ photo.
• The IRIS sliding switch governs whether the WRC-1
activates its control over the iris motor (IRIS ‘ON’), or
whether a connected iris motor is controlled by
another unit (IRIS ‘OFF’). This must be set before
switching on the WRC-1.
If the iris control is not activated (IRIS sliding switch
‘OFF’), the OPEN button serves as the PHASE button on
the camera ➪ photo.
Forward or reverse run is set in CAM mode and in the
same way as on the camera itself.
sliding switch NORM / PS/CCU
READY-LED
WRC/CAM sliding switch
IRIS sliding switch
OPEN/PHASE-
button
Operation