ARRI WRC-1 Universal Remote User Manual


 
178
The ramp duration is set,
the screen time is displayed when a corresponding
function is selected,
and the reading CONST LIGHT
confirms a constant exposure resulting from the values
set in the user-defined mode.
The corresponding submenus for each adjustable combination
of master values and compensations can be seen in the
following illustrations or chapter 5 of this instruction manual.
If technically executable limit values are exceeded when
defining the different parameters (e.g. settings are entered
for a high-speed camera model, then a normal production
camera is used), a warning is displayed in the main menu
(exceeded parameter) + RANGE and the READY LED
flashes green (in all submenus). The set values must then
be corrected.
If a function is not available (e.g. the camera being used
does not have an electronically adjustable mirror shutter)
the reading NO + (function designation) is displayed.
Another compensation option or control function must be
selected.
Quick Guide