Filter
Top Products
15
3.2.2.2 Overview of the settings available
with the COMPENSATION rotary switch
•off
In the ‘OFF’ position there is no exposure compensation
for the programmed ramp functions or the handwheel
adjustments.
(no slave values)
• Iris
In the ‘IRIS’ position the handwheel adjustments or the pro-
grammed ramp functions are compensated for by automati-
cally adjusting the iris of the lens for a constant exposure.
(slave value: iris of the lens)
•
)
In the ‘
)
’ position the handwheel adjustments or the
programmed ramp functions are compensated for by
automatically adjusting the mirror shutter angle for a
constant exposure.
(slave value: mirror shutter angle)
• Iris /
)
50%
In this mode the exposure compensation is divided equally
between the shutter angle of the camera and the iris of
the lens.
(slave values: iris of the lens + mirror shutter angle)
• max. Iris
In this mode the change in the exposure is compensated for
by the iris of the lens. If the adjustment range of the iris is
not sufficient for the given end values, the remaining rest
will be compensated for by the mirror shutter angle. In this
case, the shutter angle proportion is evenly distributed over
the entire compensation range.
(slave values: iris of the lens + possibly mirror shutter angle)
• max.
)
In this mode the change in the exposure is compensated for
by the mirror shutter angle. If the adjustment range of the
shutter angle is insufficient for the given end value, the
remaining rest will be compensated for by the iris of the lens.
In this case, the aperture proportion is evenly distributed
over the entire compensation range.
(slave value: mirror shutter angle + possibly the iris of the lens)
• user
With this function ramps can be created which do not
result in constant exposure.
The iris of the lens, the shutter angle and the camera
speed can be combined as required.
Functions