ARRI WRC-1 Universal Remote User Manual


 
52
fps
Iris
comp. off
5.5.2 Iris / compensation off
The iris can be manually adjusted within the pre-defined
end-stops of the handwheel.
Differences in exposure are not automatically
compensated for.
The main menu shows IRIS in the first display line, and
the currently adjusted T-stop in the second line.
The display shows full T-stops followed by the tenth of a
T-stop. Example: T-stop 2.8 plus half a T-stop is shown as
2.8_5. The tenths of a T-stop are linearly divided between
the two full T-stop positions.
Note The following warnings may be displayed:
IRIS TBL a valid iris table has not yet been
activated;
readings with NO in the first display line
indicate that the selected function is currently
not available (example: NO IRIS although the
iris control is activated on the WRC-1, the iris
motor has not yet been connected);
readings with RANGE in the second display
line indicate that the adjustment range of a
parameter has been exceeded (example: the
Controlling the Iris