Filter
Top Products
158
ramp fps
comp.user
PROG
PROG
fps
PROG
fps
PROG
PROG
PROG
5.7.14 Ramp speed /
compensation user
The camera speed is continuously adjusted, together with
the iris (if controlled by the WRC-1) and the mirror shutter
angle (if controlled by the WRC-1) within the freely
definable limits over a pre-defined period of time after
pressing the RAMP button in the camera run.
If appropriate values are selected, either the exposure can
be kept at a constant level, or a ramp can be defined to
change the exposure as required (e.g. fading in or out).
Note: The function of the user mode always remains
the same, irrespective of the position of the
WRC rotary switch (Iris,
)
or fps): The timing
of the simultaneous adjustment processes is
controlled using the handwheel.
If a ramp function is selected (ramp Iris, ramp
)
or ramp fps), a ramp duration can be defined.
The ramp is started while the camera is running
by pressing the RAMP button. In this case the
handwheel is without function in the main menu.
Differences in exposure are not automatically
compensated for.
Controlling the Camera Speed