32
OFFON
IRIS
RAMPSET/SEL/MODEOPEN
RUN
CAM
WRC
READY
PHASE
,Iris
WRC-1
fps,
Iris
user
max
max
Iris
50%
Iris
off
Iris
fps
fpsramp
ramp
ramp Iris
compen
sation
WRC
Note: If exposure compensation is not possible with
the set options – e.g. adjusting the iris cannot
be compensated at the same time by the iris –
the WRC-1 displays the message ‘NO FUNC’
(no function) in the main menu.
In the main menu limit values, end-stops for the handwheel
(definition: see Glossary or 5.4.2.1 Limit values), or fixed
values (definition: see Glossary or 5.4.2.2 Fixed values
below) for the exposure cannot be pre-set. The main
menu valid for each operating mode is explained later on
with the respective mode.
• By pressing the SET button values that are currently not
displayed can be checked, e.g. the current shutter angle
and the camera speed can be checked in the iris main
menu.
• Press the MODE button to change from the main menu
to the submenus. Press the MODE button again to enter
the next submenu until the main menu mode reappears.
The submenu sequence can vary according to the operat-
ing modes selected using the WRC- and COMPENSATION
rotary switches.
MODE button SET button
Using the menus