Filter
Top Products
Contents
3
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Using the Express Security Page 4-20
CLI Configuration Examples 4-21
Configuring System Power Settings Access Points 4-26
Using the AC Power Adapter 4-26
Using a Switch Capable of IEEE 802.3af Power Negotiation 4-26
Using a Switch That Does Not Support IEEE 802.3af Power Negotiation 4-26
Using a Power Injector 4-27
dot11 extension power native Command 4-27
Support for 802.11n Performance on 1250 Series Access Points with Standard 802.3af PoE 4-27
1250 Series Power Modes 4-27
Assigning an IP Address Using the CLI 4-28
Using a Telnet Session to Access the CLI 4-28
Configuring the 802.1X Supplicant 4-29
Creating a Credentials Profile 4-29
Applying the Credentials to an Interface or SSID 4-30
Applying the Credentials Profile to the Wired Port 4-30
Applying the Credentials Profile to an SSID Used For the Uplink 4-31
Creating and Applying EAP Method Profiles 4-32
Configuring IPv6 4-32
Configuring DHCPv6 address 4-33
IPv6 Neighbor Discovery 4-34
Configuring IPv6 Access Lists 4-35
RADIUS Configuration 4-35
IPv6 WDS Support 4-35
CDPv6 Support: 4-36
RA filtering 4-37
CHAPTER
5 Administering the Access Point 5-1
Disabling the Mode Button 5-2
Preventing Unauthorized Access to Your Access Point 5-3
Protecting Access to Privileged EXEC Commands 5-3
Default Password and Privilege Level Configuration 5-4
Setting or Changing a Static Enable Password 5-4
Protecting Enable and Enable Secret Passwords with Encryption 5-6
Configuring Username and Password Pairs 5-7
Configuring Multiple Privilege Levels 5-8
Setting the Privilege Level for a Command 5-8
Logging Into and Exiting a Privilege Level 5-9
Configuring Easy Setup 5-9