Filter
Top Products
Chapter 12. Camera Section In-Depth
1. CAMERA SETTING GUI
Page
122
Chapter 12. Camera Section In-Depth
In This section we will be covering Camera section, where there are controls for adjusting property,
naming, PTZ, and viewing aspects of the Camera.
1. CAMERA SETTING GUI
Camera Settings GUI has option to control Covert, AGC, Static Gain, Brightness, Contrast and Hue.
Figure 100 Camera Setting GUI
Covert: Controls the camera to be displayed on the Live view or not. As long as camera is chosen on the
“CH” section it will conduct the recording even if you choose to have it chosen to covert.
AGC: AGC is short for Automatic Gain Control. It will determine the best possible gain option for the
camera to show proper signal gain. Gain control is needed for those cameras that are installed far away.
They often times loose signal strength and with Gain control you may improve the signal strength. AGC
will try to detect the level of the signal and try to compensate internally.
Static Gain: Static Gain option only gets enabled if you do not choose to use the AGC feature. Unlike the
automatic gain the static gain control enables the option to increase and decrease the gain by user
intervention. Use this option if you need to fine tune the camera’s gain to desire output.